DIY: Mirror Auto Retract @ Door Lock for Honda BR-V
I
can’t use my previous autoretract schematic because BR-V has it’s own alarm
system and I can’t find the remote lock signal. I need to build a new
schematic. First, make a delayed relay, using NPN transistor and some other
components. Herewith the complete schema:
The module:
Lucky, all required wires are available under
door’s arm rest.
Top left: door
actuator socket. You must open door trim to reach this socket. Door lock = pink
is positive and yellow is negative (door unlock = pink is negative and yellow
is positive, but we’ll ignore this current by placing diode).
Top center: mirror switch socket. Cut yellow and grey wire and connect it to the module.
Top right: driver main switches socket. Accu = large grey wire, ignition = large red wire, ground = large black wire.
Bottom: I put the module in the back corner of the armrest, and cover it with foam to avoid rattles.
Top center: mirror switch socket. Cut yellow and grey wire and connect it to the module.
Top right: driver main switches socket. Accu = large grey wire, ignition = large red wire, ground = large black wire.
Bottom: I put the module in the back corner of the armrest, and cover it with foam to avoid rattles.
0 komentar:
Post a Comment